Hexagonal La2O3 Nanocrystals Chemically Coupled with Nitrogen-Doped Porous Carbon as Efficient Catalysts for the Oxygen Reduction Reaction

The construction of nano-scale hybrid materials with a smart interfacial structure, established by using rare earth oxides and carbon as building blocks, is essential for the development of economical and efficient catalysts for oxygen reduction reactions (ORRs). In this work, hexagonal La₂O₃ nanocrystals on a nitrogen-doped porous carbon (NPC) derived from crop radish, served as building bricks, are prepared by chemical precipitation and then calcination at elevated temperatures. The obtained La₂O₃/NPC hybrid exhibits a very high ORR activity with a half-wave potential of 0.90 V, exceeding that of commercial Pt/C (0.83 V). Both DFT theoretical and experimental results have verified that the significantly enhanced catalytic performance is ascribed to the formation of the C−O−La covalent bonds between carbon and La₂O₃. Through the covalent bonds, electrons can transfer from the carbon to La₂O₃ and occupy the unfilled e_g orbital of the La₂O₃ phase. This results in the accelerated adsorption of active oxygen and the facilitated desorption of the surface hydroxides (OH_ad⁻), thereby promoting the ORR over the catalyst.     

英国国家科研与创新署学科交叉研究资助机制及启示

Newly established in 2018, the UK Research and Innovation (UKRI) strengthens the strategic coordination of the UK research and innovation system by bringing together seven Research Councils, Research England, and Innovate UK. Through its nine organizations, UKRI funds multidisciplinary and interdisciplinary research in a number of priority areas. It also runs the Strategic Priorities Fund to support multidisciplinary and interdisciplinary research in strategic areas identified by government policies as well as the Global Challenges Research Fund to promote challenge-led interdisciplinary research needed by developing countries. The UKRI makes significant efforts to engage stakeholders in the development, design, and implementation of multidisciplinary and interdisciplinary programs. It has also developed a range of mechanisms to improve the evaluation of multidisciplinary and interdisciplinary projects. Chinese science and innovation funding agencies could draw upon the UKRI experience from four aspects to advance interdisciplinary research in China.     

Synthesis,characterization, and thermal properties of novel silicon 1,1,3,3-tetramethylguanidinate derivatives and use as single-source chemical vapor deposition precursors

A series of chemical vapor deposition (CVD) precursors have been synthesized by a single-step reaction of 1,1,3,3-tetramethylguanidine and a variety of silicon chlorides. The structures of the 1,1,3,3-tetramethylguanidinate-based compounds were verified by ¹H NMR, ¹³C NMR, XPS, EI-MS, and elemental analysis. The thermal stability, transport behavior, and vapor pressures of these compounds were evaluated by simultaneous thermal analyses (STA). These compounds are highly stable and those in liquid form are very volatile. Silicon carbonitride (SiCN) thin films were prepared by using bis (tetramethylguanidine)-dimethyl-silane as the precursor in helicon wave plasma chemical vapor deposition (HWP-CVD). The properties of the films were investigated by SEM, AFM, and XPS. The results showed that the films have good uniformities, low friction coefficient, and high hardness, enabling the films for fabrication of semiconductor devices.     

Pd based on 2-Aminopyrimidine and 1H-benzo[d]imidazol-2-amine functionalizedFe3O4 nanoparticles as novel recyclable magnetic nanocatalysts for Ullmann coupling reaction

In this study, Pd based on 2-Aminopyrimidine and 1H-benzo[d]imidazol-2-amine functionalized Fe₃O₄ magnetic nanoparticles [(Pd-APM-PSi-Fe₃O₄) and (Pd-BIA-PSi-Fe₃O₄)] was designed and used for the synthesis of di aryl ether by Ulmann cross-coupling reactions. Ulmann reaction performed with mixing of the arylhalides and phenol derivatives in DMF solvent. The prepared catalysts were characterized with various analytical techniques such as FT-IR, XRD, TGA, SEM, TEM, EDX, ICP and VSM. Pd-APM-PSi-Fe₃O₄ and Pd-BIA-PSi-Fe₃O₄ catalysts demonstrated good to excellent yields catalytic efficiency for Ulmann reactions in comparison with to commercial palladium catalysts. The catalyst is easily recycled and reused without loss of the catalytic activity. The combined merits of reusable catalyst conditions make the condensation with safe operation, no leaching of pd into environment, low pollution, rapid access to products and simple workup. Also, these novel magnetic nanocatalysts are superior to the industry standard Pd in every relevant aspect. They feature a way higher initial activity, a much more convenient separation, better recycling, and less contamination of the products. Last but not least, they can be very easily prepared from commercially available Fe₃O₄ nanoparticles using standard laboratory equipment.     

Mass spectrometry imaging of latent fingerprints using titanium oxide development powder as an existing matrix

Recent research has focused on increasing the evidentiary value of latent fingerprints through chemical analysis. Although researchers have optimized the use of organic and metal matrices for matrix‐assisted laser desorption/ionization‐mass spectrometry imaging (MALDI‐MSI) of latent fingerprints, the use of development powders as matrices has not been fully investigated. Carbon forensic powder (CFP), a common nonporous development technique, was shown to be an efficient one‐step matrix; however, a high‐resolution mass spectrometer was required in the low mass range due to carbon clusters. Titanium oxide (TiO₂) is another commonly used development powder, especially for dark nonporous surfaces. Here, forensic TiO₂ powder is utilized as a single‐step development and matrix technique for chemical imaging of latent fingerprints without the requirement of a high‐resolution mass spectrometer. All studied compounds were successfully detected when TiO₂ was used as the matrix in positive mode, although, generally, the overall ion signals were lower than the previously studied CFP. TiO₂ provided quality mass spectrometry (MS) images of endogenous and exogenous latent fingerprint compounds. The subsequent addition of traditional matrices on top of the TiO₂ powder was ineffective for universal detection of latent fingerprint compounds. Forensic TiO₂ development powder works as an efficient single‐step development and matrix technique for MALDI‐MSI analysis of latent fingerprints in positive mode and does not require a high‐resolution mass spectrometer for analysis.     

On the Interfacial Flow Over Porous Media Composed of Packed Spheres: Part 1-Identification of the Effective Slip Length

Transport in Porous Media - The effective slip length at the interface between pure fluid flow and porous media composed of packed spheres has been accurately characterized. In this study, as the...     

Preparation and in vivo imaging of a novel potential αvβ3 targeting PET/MRI dual-modal imaging agent

Journal of Radioanalytical and Nuclear Chemistry - Multi-modal biomedical imaging has played an essential role in tumor diagnosis. However, constructing a multi-modal imaging contrast agent with...